Panduit® Mini-Com Opti-CRIMP FJ 62.5/125um Pre-Polished Crimp Fiber Optic Modules

Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice.

FJ Opti-Crimp 62.5/125μm multimode duplex fiber optic jack module with phosphor bronze split sleeves for 3.0mm jacketed cable or 900μm tight-buffered fiber installation.

Features:

TIA/EIA-604 FOCIS-6 compliant connectors
Exceed TIA/EIA-568-B.3 requirements
Insertion loss: >3dB typical (62.5/125μm), .35dB typical (50/125μm)
Return loss: >20dB
Pre-polished mechanical crimp termination eliminates polishing and adhesive, reducing installation time by 70% over field polish FJ Jack Modules
Non-optical disconnect maintains data transmission under tensile loads for jacketed cable
Mechanical crimp cable retention consistently provides higher than industry standard cable retention
RJ45 small form factor duplex jack module -- double the port density in one module space
Mini-Com Jack Modules snap in and out of all Mini-Com closet products and work area outlets
Each duplex jack module includes housing, cover, two ferrule assemblies with pre-polished fiber stubs, two crimp sleeves, one boot for 900μm buffered fiber, one boot for 3mm jacketed cable, and one dust cap
Can be clearly identified with labels and icons
Fiber cable type: tight-buffered only
Fiber cable size: 900μm tight-buffered fiber or 3.0mm jacketed cable
Ferrule type: 2.5mm zirconia ceramic (highest durability for repeated matings)
FJ Opti-Crimp Jack Modules and crimp tool allow visual verification of optimal continuity during crimp termination with the FVFLKIT Visual Fault Locator Kit (included in FJMVKIT Termination Kit)
Use Opti-Crimp Termination Kit (FJMVKIT)

Product Description

Features: