|
| 21. | 
Model # FR6ALB | | Used to support the 6x4 and 4x4 systems attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail....Read More
|
$71.47
|  Detail Box
In Stock |
|
| 22. | 
Model # FRRA12X4 | | 12x4 Horizontal right angle fitting attaches to 12x4 channel and/or fitting to create a 90° horizontal turn from a straight horizontal run. Inside divider walls manage cables routed around horizontal righ...Read More
|
$150.93
| Detail Box
Usually ships in 2 weeks |
|
| 23. | 
Model # NRV6 | | High capacity front and rear vertical manager. Large finger openings accommodate up to 24 Category 6A cables....Read More
|
$409.53
| Detail Box
Usually ships in 2 weeks |
|
| 24. | 
Model # FEC2X2YL | | Fiber-Duct system fitting used for closing off open ends of the channel. No coupler required. Push-on installation....Read More
|
$17.42
| Detail Box
Usually ships in 2 weeks |
|
| 25. | 
Model # FREC4X4YL | | The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. The fitting is used for closing off open ends of the channe...Read More
|
$17.52
| Detail Box
In Stock |
|
| 26. | 
Model # FLB | | Used to support 2x2 and 4x4 Fiber-Duct Systems by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting channel to bracket....Read More
|
$21.63
| Detail Box
In Stock |
|
| 27. | 
Model # FTR2X2YL | | Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from a FiberRunner® Spill-Over FRSPYL or from 2x2 Fiber-Duct™ Channel....Read More
|
$45.47
| Detail Box
Usually ships in 2 weeks |
|
| 28. | 
Model # FRLPR42BL | | Assembled into the vertical tee 6x4 system spillouts or 4x4 vertical tee with an audible snap, the low profile reducer 4x4 to 2x2 for vertical tee allows for the transition to 2x2 Fiber or 2x2 fiber channe...Read More
|
$48.03
| Detail Box |  Product Brochure (pdf)
Usually ships in 1 week |
|
| 29. | 
Model # CMSRC2 | | Cable management bend radius control clip provides cable bend radius control and facilitates patch cable routing to and from horizontal cable management panels. Mounts directly to 19" or 23" EIA standar...Read More
|
$52.11
| Detail Box
Usually ships in 10 days |
|
| 30. | 
Model # FEIAB58 | | EIA/TIA Threaded Rod Mounting Bracket provides a vertical threaded rod stud to mount FiberRunner and fiber-duct threaded rod mounting brackets onto....Read More
|
$52.22
| Detail Box | Product Brochure (pdf)
Usually ships in 5 weeks |
|
| 31. | 
Model # FRIV456X4YL | | The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling....Read More
|
$94.02
| Detail Box
Usually ships in 10 days |
|
| 32. | 
Model # FROV456X4YL | | Attaches to 6x4 channel and/or fittings to create a 45 deg. downward angle from a straight horizontal run. Used with inside vertical 45 deg. angle fitting FRIV456X4YL to change level of a straight horizonta...Read More
|
$94.02
| Detail Box
Usually ships in 1 week |
|
| 33. | 
Model # FRTSC6YL | | Optional split cover for the horizontal tee fitting FRT6X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to ad...Read More
|
$94.26
| Detail Box
Usually ships in 1 week |
|
| 34. | 
Model # FRHC6 | | The FiberRunner 6x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
|
$95.58
| Detail Box
Usually ships in 2 weeks |
|
| 35. | 
Model # FRRA6X4YL | | Attaches to 6x4 channel and/or fittings to create a 90deg. horizontal turn from a straight horizontal run. Accepts optional split cover FRRASC6YL....Read More
|
$106.57
| Detail Box
Usually ships in 1 week |
|
| 36. | 
Model # FRTSC4YL | | Optional split cover for the horizontal tee fitting FRT4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to ad...Read More
|
$112.81
| Detail Box
Usually ships in 2 weeks |
|
| 37. | 
Model # FRT6X4YL | | Attaches to 6x4 channel and/or fittings to create a 90 deg. horizontal branch from a straight horizontal run. Accepts optional split cover FRTSC6YL....Read More
|
$114.03
| Detail Box
Usually ships in 1 week |
|
| 38. | 
Model # FRRASC12 | | Optional split cover for the horizontal right angle fitting FRRA12X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy acces...Read More
|
$121.69
| Detail Box
Usually ships in 2 weeks |
|
| 39. | 
Model # FRHC12YL6 | | FiberRunner 6' Length 12" X 4" Hinged Cover is designed to cover FiberRunner 12" X 4" Channel....Read More
|
$123.93
| Detail Box
Usually ships in 10 days |
|
| 40. | 
Model # FRVT6X4YL | | Attaches to 6x4 channel and/or fittings to create 90° vertical drop from a straight horizontal run. Hinged door included. Accepts FIDT4X4BL, FTR4X4YL, S4X4YL6, or E4X4YL6 directly. Accepts optional snap-o...Read More
|
$133.29
| Detail Box
Usually ships in 1 week |
|
Email Page
