|
| 1. | 
Model # FLB | | Used to support 2x2 and 4x4 Fiber-Duct Systems by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting channel to bracket....Read More
|
$21.63
|  Detail Box
In Stock |
|
| 2. | 
Model # FR1-5IDEBL | | FR1.5IDEBL is a 1-Port Spill Out Side Exit to 1.5 Inches Inside Diameter Corrugated Tubing....Read More
|
$50.35
| Detail Box
Usually ships in 2 weeks |
|
| 3. | 
Model # FRRA12X4 | | 12x4 Horizontal right angle fitting attaches to 12x4 channel and/or fitting to create a 90° horizontal turn from a straight horizontal run. Inside divider walls manage cables routed around horizontal righ...Read More
|
$150.93
| Detail Box
Usually ships in 2 weeks |
|
| 4. | 
Model # FRBC12X4YL | | Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary....Read More
|
$54.33
| Detail Box
Usually ships in 10 days |
|
| 5. | 
Model # FHDEC2X2YL | | 2x2 End Cap Fitting is used for closing off open ends of the hinged channel or fittings....Read More
|
$18.97
| Detail Box
Usually ships in 1 week |
|
| 6. | 
Model # FRHD2KTYL | | Panduit FRHD2KTYL provides secure, accessible route for cables spilling out from a vertical tee or spill-over junction to rack mounted equipment. Attaches to 2x2 vertical tee exit or spill-over junctio...Read More
|
$152.32
| Detail Box |  Product Brochure (pdf)
Usually ships in 1 week |
|
| 7. | 
Model # FBC2X2BL | | 2x2 QuikLock Coupler quickly joins two sections of hinged channel and/or fittings....Read More
|
$20.32
| Detail Box
Usually ships in 2 weeks |
|
| 8. | 
Model # FVTHD2X2YL | | Vertical Tee is designed to attach to a 2x2 channel and creates a 90 degree vertical drop from a horizontal run....Read More
|
$80.40
| Detail Box
Usually ships in 5 days |
|
| 9. | 
Model # FREC4X4YL | | The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. The fitting is used for closing off open ends of the channe...Read More
|
$17.52
| Detail Box
In Stock |
|
| 10. | 
Model # FR4X4 | | 4x4 FiberRunner Channel.
The FiberRunner 4x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling run...Read More
|
$146.25
| Detail Box
Usually ships in 8 weeks |
|
| 11. | 
Model # FRRA4X4YL | | Attaches to 4x4 channel and/or fitting to create a 90 deg. horizontal turn from a straight horizontal run. Accepts optional split cover FRRASC4YL....Read More
|
$145.89
| Detail Box
In Stock |
|
| 12. | 
Model # FRVT4X4YL | | Attaches to 4x4 channel or fittings to create a 90° vertical drop from a horizontal run. Hinged door included. Accepts FTR4X4YL, FIDT4X4BL, S4X4YL6 or E4X4YL6 directly. Accepts optional snap-on cover FRHC4YL...Read More
|
$139.89
| Detail Box
Usually ships in 2 weeks |
|
| 13. | 
Model # FRTSC4YL | | Optional split cover for the horizontal tee fitting FRT4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to ad...Read More
|
$112.81
| Detail Box
Usually ships in 2 weeks |
|
| 14. | 
Model # FRBC4X4YL | | Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary....Read More
|
$43.68
| Detail Box
Usually ships in 10 weeks |
|
| 15. | 
Model # NRV6 | | High capacity front and rear vertical manager. Large finger openings accommodate up to 24 Category 6A cables....Read More
|
$409.53
| Detail Box
Usually ships in 2 weeks |
|
| 16. | 
Model # FREC6X4YL | | 6x4 End Cap Fitting features bend radius control to prevent excessive bends in high performance copper and fiber optic cabling....Read More
|
$17.08
| Detail Box
Usually ships in 2 weeks |
|
| 17. | 
Model # FRBC6X4YL | | 6x4 FiberRunner QuikLock Pre-assembled Coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow couple...Read More
|
$31.64
| Detail Box | Product Brochure (pdf)
Usually ships in 10 days |
|
| 18. | 
Model # FR6X4 | | The FiberRunner 6x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
|
$133.81
| Detail Box
Usually ships in 2 weeks |
|
| 19. | 
Model # FRSHC6OR6 | | Optional split hinged cover for the channel...Read More
|
$89.87
| Detail Box
Usually ships in 1 week |
|
| 20. | 
Model # FROV456X4YL | | Attaches to 6x4 channel and/or fittings to create a 45 deg. downward angle from a straight horizontal run. Used with inside vertical 45 deg. angle fitting FRIV456X4YL to change level of a straight horizonta...Read More
|
$94.02
| Detail Box
Usually ships in 1 week |
|
Email Page
