|
| 1. | 
Model # FRSPJ4X4 | | Assembles onto 4x4, 6x4, 12x4, or 24x4 FiberRunner®Channel, spilling over the side into a 4x4 vertical exit. Requires coupler to attach 4x4 FiberRunner®Channel and fittings to the vertical exit. Mount...Read More
|
Click here to contact Sales for pricing! |  Detail Box |  Product Brochure (pdf)
|
|
| 2. | 
Model # FRUIB-X | | Universal Innerduct Bracket. Read More
|
$9.88
| Detail Box
Usually ships in 2 weeks |
|
| 3. | 
Model # FREC6X4YL | | 6x4 End Cap Fitting features bend radius control to prevent excessive bends in high performance copper and fiber optic cabling....Read More
|
$17.08
| Detail Box
Usually ships in 2 weeks |
|
| 4. | 
Model # FEC2X2YL | | Fiber-Duct system fitting used for closing off open ends of the channel. No coupler required. Push-on installation....Read More
|
$17.42
| Detail Box
Usually ships in 2 weeks |
|
| 5. | 
Model # FREC4X4YL | | The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. The fitting is used for closing off open ends of the channe...Read More
|
$17.52
| Detail Box
In Stock |
|
| 6. | 
Model # HC2YL6 | | FiberRunner 2x2 Snap-On Hinged Cover designed for HS2X2YL6 and H2X2YL6. The innovative cover can hinge open to 90° from either Side of the Channel and be removed completely if desired....Read More
|
$17.52
| Detail Box
Usually ships in 1 week |
|
| 7. | 
Model # FHDEC2X2YL | | 2x2 End Cap Fitting is used for closing off open ends of the hinged channel or fittings....Read More
|
$18.97
| Detail Box
Usually ships in 1 week |
|
| 8. | 
Model # FBC2X2BL | | 2x2 QuikLock Coupler quickly joins two sections of hinged channel and/or fittings....Read More
|
$20.32
| Detail Box
Usually ships in 2 weeks |
|
| 9. | 
Model # FLB | | Used to support 2x2 and 4x4 Fiber-Duct Systems by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting channel to bracket....Read More
|
$21.63
| Detail Box
In Stock |
|
| 10. | 
Model # FRBC6X4YL | | 6x4 FiberRunner QuikLock Pre-assembled Coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow couple...Read More
|
$31.64
| Detail Box | Product Brochure (pdf)
Usually ships in 10 days |
|
| 11. | 
Model # FRSTRCLIP | | Strut Clip Kit allows fiberrunner channel to be attached directly to standard 1 5/8" wide strut structures....Read More
|
$35.26
| Detail Box
Usually ships in 4 weeks |
|
| 12. | 
Model # FRBC4X4YL | | Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary....Read More
|
$43.68
| Detail Box
Usually ships in 10 weeks |
|
| 13. | 
Model # FTR2X2YL | | Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from a FiberRunner® Spill-Over FRSPYL or from 2x2 Fiber-Duct™ Channel....Read More
|
$45.47
| Detail Box
Usually ships in 2 weeks |
|
| 14. | 
Model # FR6ACB12 | | Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or withou...Read More
|
$45.63
| Detail Box
Usually ships in 2 weeks |
|
| 15. | 
Model # HS2X2YL6 | | FiberRunner 2x2 Hinged Channel is used to carry Cables throughout the FiberRunner 2x2 Routing System. Accepts hinged cover HC2YL6. Use QuikLock Coupler FBC2X2YL to attach channel and/or fittings....Read More
|
$47.46
| Detail Box
Usually ships in 1 week |
|
| 16. | 
Model # FRLPR42BL | | Assembled into the vertical tee 6x4 system spillouts or 4x4 vertical tee with an audible snap, the low profile reducer 4x4 to 2x2 for vertical tee allows for the transition to 2x2 Fiber or 2x2 fiber channe...Read More
|
$48.03
| Detail Box | Product Brochure (pdf)
Usually ships in 1 week |
|
| 17. | 
Model # FR1-5IDEBL | | FR1.5IDEBL is a 1-Port Spill Out Side Exit to 1.5 Inches Inside Diameter Corrugated Tubing....Read More
|
$50.35
| Detail Box
Usually ships in 2 weeks |
|
| 18. | 
Model # CMSRC2 | | Cable management bend radius control clip provides cable bend radius control and facilitates patch cable routing to and from horizontal cable management panels. Mounts directly to 19" or 23" EIA standar...Read More
|
$52.11
| Detail Box
Usually ships in 10 days |
|
| 19. | 
Model # FEIAB58 | | EIA/TIA Threaded Rod Mounting Bracket provides a vertical threaded rod stud to mount FiberRunner and fiber-duct threaded rod mounting brackets onto....Read More
|
$52.22
| Detail Box | Product Brochure (pdf)
Usually ships in 5 weeks |
|
| 20. | 
Model # FRBC12X4YL | | Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary....Read More
|
$54.33
| Detail Box
Usually ships in 10 days |
|
Email Page
