|
| 1. | 
Model # FVTHD2X2YL | | Vertical Tee is designed to attach to a 2x2 channel and creates a 90 degree vertical drop from a horizontal run....Read More
|
$79.99
|  Detail Box
Usually ships in 5 days |
|
| 2. | 
Model # FREC6X4YL | | 6x4 End Cap Fitting features bend radius control to prevent excessive bends in high performance copper and fiber optic cabling....Read More
|
$16.26
| Detail Box
Usually ships in 1 week |
|
| 3. | 
Model # FRBC6X4YL | | 6x4 FiberRunner QuikLock Pre-assembled Coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow couple...Read More
|
$30.14
| Detail Box |  Product Brochure (pdf)
In Stock |
|
| 4. | 
Model # FRUIB-X | | Universal Innerduct Bracket. Read More
|
$9.50
| Detail Box
In Stock |
|
| 5. | 
Model # FRSTRCLIP | | Strut Clip Kit allows fiberrunner channel to be attached directly to standard 1 5/8" wide strut structures....Read More
|
$35.26
| Detail Box
In Stock |
|
| 6. | 
Model # FR1-5IDEBL | | 1-Port Spill Out Side Exit to 1.5 Inches Inside Diameter Corrugated Tubing....Read More
|
$49.68
| Detail Box
Usually ships in 5 days |
|
| 7. | 
Model # FRHC4YL6 | | FiberRunner 4x4 Snap-On Hinged Cover is part of the FiberRunner 4x4 Routing System. Designed to segregate, route, and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
|
$82.52
| Detail Box
In Stock |
|
| 8. |  
Model # HC2YL6 | | FiberRunner 2x2 Snap-On Hinged Cover designed for HS2X2YL6 and H2X2YL6. The innovative cover can hinge open to 90° from either Side of the Channel and be removed completely if desired....Read More
|
$15.60
| Detail Box | Product Brochure (pdf)
Usually ships in 1 week |
|
| 9. | 
Model # HS2X2YL6 | | FiberRunner 2x2 Hinged Channel is used to carry Cables throughout the FiberRunner 2x2 Routing System. Accepts hinged cover HC2YL6. Use QuikLock Coupler FBC2X2YL to attach channel and/or fittings....Read More
|
$45.68
| Detail Box | Product Brochure (pdf)
Usually ships in 24 hours |
|
| 10. | 
Model # FBC2X2BL | | 2x2 QuikLock Coupler quickly joins two sections of hinged channel and/or fittings....Read More
|
$18.97
| Detail Box
Usually ships in 4 days |
|
| 11. | 
Model # FRBC12X4YL | | Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary....Read More
|
$53.97
| Detail Box
Usually ships in 10 days |
|
| 12. | 
Model # S3F-C | | Snap-Clip Mounting Bracket for use with Duct Types G, F, FS, and D....Read More
|
$202.89
| Detail Box | Product Brochure (pdf)
Usually ships in 1 week |
|
| 13. | 
Model # FREC4X4YL | | The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. The fitting is used for closing off open ends of the channe...Read More
|
$17.22
| Detail Box
In Stock |
|
| 14. | 
Model # FEC2X2YL | | Fiber-Duct system fitting used for closing off open ends of the channel. No coupler required. Push-on installation....Read More
|
$17.42
| Detail Box
In Stock |
|
| 15. | 
Model # FRLPR42BL | | Assembled into the vertical tee 6x4 system spillouts or 4x4 vertical tee with an audible snap, the low profile reducer 4x4 to 2x2 for vertical tee allows for the transition to 2x2 Fiber or 2x2 fiber channe...Read More
|
$46.20
| Detail Box | Product Brochure (pdf)
Usually ships in 1 week |
|
| 16. | 
Model # FTR2X2YL | | Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from a FiberRunner® Spill-Over FRSPYL or from 2x2 Fiber-Duct™ Channel....Read More
|
$49.89
| Detail Box
In Stock |
|
| 17. | 
Model # FRHC6 | | The FiberRunner 6x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
|
$83.87
| Detail Box
In Stock |
|
| 18. | 
Model # FRTSC4YL | | Optional split cover for the horizontal tee fitting FRT4X4YL. Snap-on feature allows cover to be installed and removed with no tools required. Creates radiused 3/4" (19mm) opening for easy access to ad...Read More
|
$84.82
| Detail Box
In Stock |
|
| 19. | 
Model # FRIV456X4YL | | The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling....Read More
|
$90.41
| Detail Box
In Stock |
|
| 20. | 
Model # FROV456X4YL | | Attaches to 6x4 channel and/or fittings to create a 45 deg. downward angle from a straight horizontal run. Used with inside vertical 45 deg. angle fitting FRIV456X4YL to change level of a straight horizonta...Read More
|
$90.41
| Detail Box
In Stock |
|
Email Page
