|
| 1. | 
Model # FVTHD2X2YL | | Vertical Tee is designed to attach to a 2x2 channel and creates a 90 degree vertical drop from a horizontal run....Read More
|
$79.99
|  Detail Box
Usually ships in 5 days |
|
| 2. | 
Model # FREC6X4YL | | 6x4 End Cap Fitting features bend radius control to prevent excessive bends in high performance copper and fiber optic cabling....Read More
|
$16.26
| Detail Box
Usually ships in 2 weeks |
|
| 3. | 
Model # FRBC6X4YL | | 6x4 FiberRunner QuikLock Pre-assembled Coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow couple...Read More
|
$30.14
| Detail Box |  Product Brochure (pdf)
In Stock |
|
| 4. | 
Model # FRUIB-X | | Universal Innerduct Bracket. Read More
|
$9.50
| Detail Box
In Stock |
|
| 5. | 
Model # FRSTRCLIP | | Strut Clip Kit allows fiberrunner channel to be attached directly to standard 1 5/8" wide strut structures....Read More
|
$35.26
| Detail Box
In Stock |
|
| 6. | 
Model # FR1-5IDEBL | | FR1.5IDEBL is a 1-Port Spill Out Side Exit to 1.5 Inches Inside Diameter Corrugated Tubing....Read More
|
$50.35
| Detail Box
Usually ships in 2 weeks |
|
| 7. | 
Model # FRHC4YL6 | | FiberRunner 4x4 Snap-On Hinged Cover is part of the FiberRunner 4x4 Routing System. Designed to segregate, route, and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
|
$82.52
| Detail Box
In Stock |
|
| 8. | 
Model # HC2YL6 | | FiberRunner 2x2 Snap-On Hinged Cover designed for HS2X2YL6 and H2X2YL6. The innovative cover can hinge open to 90° from either Side of the Channel and be removed completely if desired....Read More
|
$15.60
| Detail Box
Usually ships in 1 week |
|
| 9. | 
Model # HS2X2YL6 | | FiberRunner 2x2 Hinged Channel is used to carry Cables throughout the FiberRunner 2x2 Routing System. Accepts hinged cover HC2YL6. Use QuikLock Coupler FBC2X2YL to attach channel and/or fittings....Read More
|
$45.68
| Detail Box
Usually ships in 24 hours |
|
| 10. | 
Model # FRSPJ2X2YL | | Spill-Over Junction with 2x2 Exit allows for safe transition from horizontal to vertical runs. Transition to channel, slotted channel, and corrugated loom tubing....Read More
|
$109.97
| Detail Box | Product Brochure (pdf)
Usually ships in 10 days |
|
| 11. | 
Model # FBC2X2BL | | 2x2 QuikLock Coupler quickly joins two sections of hinged channel and/or fittings....Read More
|
$18.97
| Detail Box
Usually ships in 4 days |
|
| 12. | 
Model # FRBC12X4YL | | Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary....Read More
|
$53.97
| Detail Box
Usually ships in 10 days |
|
| 13. | 
Model # S3F-C | | Snap-Clip Mounting Bracket for use with Duct Types G, F, FS, and D....Read More
|
$202.89
| Detail Box | Product Brochure (pdf)
Usually ships in 1 week |
|
| 14. | 
Model # FRRA12X4 | | 12x4 Horizontal right angle fitting attaches to 12x4 channel and/or fitting to create a 90° horizontal turn from a straight horizontal run. Inside divider walls manage cables routed around horizontal righ...Read More
|
$150.78
| Detail Box
Usually ships in 2 weeks |
|
| 15. | 
Model # FREC4X4YL | | The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. The fitting is used for closing off open ends of the channe...Read More
|
$17.22
| Detail Box
In Stock |
|
| 16. | 
Model # FEC2X2YL | | Fiber-Duct system fitting used for closing off open ends of the channel. No coupler required. Push-on installation....Read More
|
$17.42
| Detail Box
In Stock |
|
| 17. | 
Model # FRLPR42BL | | Assembled into the vertical tee 6x4 system spillouts or 4x4 vertical tee with an audible snap, the low profile reducer 4x4 to 2x2 for vertical tee allows for the transition to 2x2 Fiber or 2x2 fiber channe...Read More
|
$46.20
| Detail Box | Product Brochure (pdf)
Usually ships in 1 week |
|
| 18. | 
Model # FTR2X2YL | | Used to limit the bend radius of the cable to 2" (50.8mm) when exiting from a FiberRunner® Spill-Over FRSPYL or from 2x2 Fiber-Duct™ Channel....Read More
|
$49.89
| Detail Box
In Stock |
|
| 19. | 
Model # FEIAB58 | | EIA/TIA Threaded Rod Mounting Bracket provides a vertical threaded rod stud to mount FiberRunner and fiber-duct threaded rod mounting brackets onto....Read More
|
$52.22
| Detail Box
In Stock |
|
| 20. | 
Model # FRHC6 | | The FiberRunner 6x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
|
$83.87
| Detail Box
In Stock |
|
Email Page
