|
| 1. | 
Model # CMSRC2 | | Cable management bend radius control clip provides cable bend radius control and facilitates patch cable routing to and from horizontal cable management panels. Mounts directly to 19" or 23" EIA standar...Read More
|
$28.97
|  Detail Box
Usually ships in 1 week |
|
| 2. | 
Model # FBC2X2BL | | 2x2 QuikLock Coupler quickly joins two sections of hinged channel and/or fittings....Read More
|
$18.97
| Detail Box
Usually ships in 1 week |
|
| 3. | 
Model # FEC2X2YL | | Fiber-Duct system fitting used for closing off open ends of the channel. No coupler required. Push-on installation....Read More
|
$17.42
| Detail Box
In Stock |
|
| 4. | 
Model # FEIAB58 | | EIA/TIA Threaded Rod Mounting Bracket provides a vertical threaded rod stud to mount FiberRunner and fiber-duct threaded rod mounting brackets onto....Read More
|
$52.22
| Detail Box
Usually ships in 2 weeks |
|
| 5. | 
Model # FLB | | Used to support 2x2 and 4x4 Fiber-Duct Systems by attaching to a wall or the front or back of an equipment rack. Contains hardware for mounting channel to bracket....Read More
|
$21.63
| Detail Box
In Stock |
|
| 6. | 
Model # FMDJW | | Fiber Splice Drawer with 24 or 48 ST Pigtails. Read More
|
$216.01
| Detail Box
Usually ships in 10 days |
|
| 7. | 
Model # FR1-5IDEBL | | FR1.5IDEBL is a 1-Port Spill Out Side Exit to 1.5 Inches Inside Diameter Corrugated Tubing....Read More
|
$50.35
| Detail Box
Usually ships in 2 weeks |
|
| 8. | 
Model # FR12X4YL6 | | FiberRunner 6' Length 12" X 4" Channel is used to carry the cables horizontally throughout the FiberRunner 12x4 Routing System....Read More
|
$178.62
| Detail Box |  Product Brochure (pdf)
In Stock |
|
| 9. | 
Model # FR4X4 | | 4x4 FiberRunner Channel.
The FiberRunner 4x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling run...Read More
|
Click here to contact Sales for pricing! | Detail Box
|
|
| 10. | 
Model # FR6ACB12 | | Used to support the 6x4 and 4x4 systems from any new threaded rod extending down directly from the ceiling, grid, or ladder rack system. Two position height adjustments to accommodate system with or withou...Read More
|
$39.13
| Detail Box
Usually ships in 1 week |
|
| 11. | 
Model # FR6X4 | | The FiberRunner 6x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
|
$121.82
| Detail Box
Usually ships in 24 hours |
|
| 12. | 
Model # FRBC12X4YL | | Pre-assembled coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow coupler to be removed if necessary....Read More
|
$54.33
| Detail Box
Usually ships in 10 days |
|
| 13. | 
Model # FRBC6X4YL | | 6x4 FiberRunner QuikLock Pre-assembled Coupler quickly joins two sections of channel and/or fittings. Mechanically attaches without tightening bolts. Bolts release using 3/8" nut driver to allow couple...Read More
|
$31.33
| Detail Box | Product Brochure (pdf)
In Stock |
|
| 14. | 
Model # FREC4X4YL | | The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling. The fitting is used for closing off open ends of the channe...Read More
|
$17.22
| Detail Box
In Stock |
|
| 15. | 
Model # FREC6X4YL | | 6x4 End Cap Fitting features bend radius control to prevent excessive bends in high performance copper and fiber optic cabling....Read More
|
$16.92
| Detail Box
Usually ships in 2 weeks |
|
| 16. | 
Model # FRFWC6X4 | | The complete selection of fittings feature bend radius control to prevent excessive bends in high performance copper and fiber optic cabling....Read More
|
$230.89
| Detail Box
In Stock |
|
| 17. | 
Model # FRHC12YL6 | | FiberRunner 6' Length 12" X 4" Hinged Cover is designed to cover FiberRunner 12" X 4" Channel....Read More
|
$123.93
| Detail Box
Usually ships in 10 days |
|
| 18. | 
Model # FRHC4YL6 | | FiberRunner 4x4 Snap-On Hinged Cover is part of the FiberRunner 4x4 Routing System. Designed to segregate, route, and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
|
$82.52
| Detail Box
In Stock |
|
| 19. | 
Model # FRHC6 | | The FiberRunner 6x4 Routing System is comprised of channel, fittings and brackets designed to segregate, route and protect fiber optic and high performance copper cabling runs to and between equipmen...Read More
|
$87.17
| Detail Box
In Stock |
|
| 20. | 
Model # FRHD2KTYL | | Provides secure, accessible route for cables spilling out from a vertical tee or spill-over junction to rack mounted equipment. Attaches to 2x2 vertical tee exit or spill-over junction with a 2x2 exit...Read More
|
$138.46
| Detail Box | Product Brochure (pdf)
Usually ships in 1 week |
|
Email Page
